QIDI-Q3D-FAQ
Frequently Asked Questions For QIDI Q3D
What are the main differences between QIDI Q3D and QIDI Q2?
The QIDI Q3D upgrades nearly every subsystem over the Q2 — true dual-material printing is the headline.
- Auxiliary nozzle — a second hotend for true dual-material printing, a second color, or soluble supports.
- 260 x 260 x 260 mm build volume — the same total volume is available for dual-nozzle printing.
- Gen-4 70 C heated chamber — up from the Q2's Gen-2 65 C, better for warp-prone engineering filaments.
- Eddy sensor auto leveling — replaces the Q2's loadcell sensor for automatic bed leveling.
- Extruder Thermal Monitor (ETM) — Continuously tracks extruder temperature to prevent clogs.
- 64 GB eMMC storage — double the Q2's 32 GB.
- Cortex-M7 motion controller — upgraded from the Q2's Cortex-M4.
- Dual-band 2.4/5 GHz Wi-Fi (802.11ac) and a 4-inch 800 x 480 touchscreen.
Bottom line: If you need two materials in one print or want to tackle ABS, PC and fiber-reinforced filaments, the Q3D is the clearer choice over the Q2.
What is the QIDI Q3D 3D printer?
The QIDI Q3D is a high speed CoreXY 3D printer built for dual-nozzle, multi-material printing. It combines a 260 x 260 x 260 mm main build volume, a Gen-4 independently heated chamber up to 70 C, a 350 C ceramic hotend, and an auxiliary nozzle for a second material or soluble supports high quality prints. It is designed for PLA, ABS, ASA, PA, PC and carbon/glass-fiber reinforced filaments.
What is the maximum print size of the QIDI Q3D?
Main nozzle printing: 260 x 260 x 260 mm. Auxiliary nozzle printing and dual-nozzle printing: 240 x 260 x 255 mm. Total volume for two nozzles: 260 x 260 x 260 mm. The printer itself measures 405 x 475 x 441 mm and weighs 29 kg net.
How fast is the QIDI Q3D 3D printer?
The tool head reaches a maximum movement speed of 600 mm/s, with a maximum printing acceleration of 20,000 mm/s squared. Input Shaping is supported to reduce ringing and keep surfaces clean at high speeds. The hotend uses ceramic plate heating and reaches 220 C from 30 C in about 40 seconds.
Does the QIDI Q3D support dual-color or multi-material printing?
Yes. The Q3D uses a main hotend plus an auxiliary hotend, so two different filaments can be printed in one job. The auxiliary hotend supports PLA (excluding PLA Aero), PETG, ABS, ASA, TPU 64D, PA, PC, PVA and support filaments including Support for PLA, PLA/PETG, ABS and PA/PET. The dual-nozzle printing area is 240 x 260 x 255 mm. For best quality, print PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU 64D and PA/PET support with the main hotend.
What are the maximum hotend and heated bed temperatures of Q3D?
The hotend reaches up to 350 C and the heated bed up to 120 C. The hotend uses ceramic plate heating with a multi-metal structure and a thermocouple for accurate temperature measurement. The build plate is a double-sided PEI magnetic flexible plate on an aluminum silicone heated bed.
Why does the 70 C heated chamber matter, and is Q3D better than Q2 for engineering filaments?
The QIDI Q3D features Gen-4 independent chamber heating up to 70 C, compared with 65 C on the Q2. A hotter chamber keeps large ABS, ASA, PC and PA parts from warping and cracking and improves layer adhesion. The chamber uses a 4-pin PWM circulation fan with RPM feedback. Together with a 350 C hotend and a 3-in-1 air filter, this makes the Q3D well suited to engineering and fiber-reinforced filaments.
Can I change the nozzle on the QIDI Q3D?
Yes. The Q3D uses quick-swap bimetal nozzles. A 0.4 mm nozzle is standard, and 0.2 mm, 0.6 mm and 0.8 mm nozzles are optional. The main extruder is a direct drive unit with hardened steel dual gears and a 5.9:1 transmission ratio, and a filament cutter is built in.
What sensors and safety features does the QIDI Q3D have?
The Q3D includes an Eddy sensor integrated into the hotend for automatic leveling, a filament run-out sensor, Extruder Thermal Monitor (ETM), filament tangle detection (requires QIDI BOX), Input Shaping, power-loss recovery, AI camera detection, and RGB status lighting on the heated bed.
Does the QIDI Q3D work with QIDI BOX?
The Q3D supports QIDI BOX for filament tangle detection. Multi-material printing is handled by its built-in dual-nozzle system and can add up to 4 external QIDI BOXs.
Which filaments can the QIDI Q3D print?
The main hotend supports PLA, ABS, ASA, PETG, TPU, PA, PC and carbon/glass-fiber reinforced polymers. The auxiliary hotend supports PLA (excluding PLA Aero), PETG, ABS, ASA, TPU 64D, PA, PC, PVA, and support materials for PLA/PETG, ABS, PA/PET and PET. QIDI recommends official filaments for the best print quality.
Can the QIDI Q3D print supports?
Yes. With the auxiliary nozzle you can print PVA or dedicated support filaments such as Support for PLA/PETG, Support for ABS and Support for PA/PET while the main nozzle prints the model. This dual-extruder setup is ideal for complex geometries and overhangs that are difficult with a single nozzle.
Does the QIDI Q3D have air filtration?
Yes. It has a 3-in-1 air filter combining a G3 pre-filter, an H12 HEPA filter and coconut-shell activated carbon. Working with the chamber circulation fan, it reduces fumes and ultrafine particles when printing ABS, ASA or PC.
Does the QIDI Q3D have a camera and AI print monitoring?
Yes. The Q3D includes an HD camera with time-lapse support and AI camera detection for monitoring prints. You can control and check the printer from the 4-inch 800 x 480 touchscreen, the mobile app or the PC application.
How do I connect the QIDI Q3D to Wi-Fi, phone or PC?
The Q3D supports dual-band Wi-Fi (2.4 GHz and 5 GHz, IEEE 802.11a/b/g/n/ac) and USB, and works with a USB 2.0 flash drive. Control interfaces include the touchscreen, mobile app and PC application. Storage is 64 GB eMMC plus USB flash drive, so you can print files without a computer.
Which slicers and file formats does the QIDI Q3D support?
The Q3D works with QIDI Studio and third-party slicers such as PrusaSlicer and Orca, although some advanced features may not be supported. Supported file formats include STL, OBJ, 3MF and STEP (.stp/.step). Supported operating systems are Windows, macOS and Linux.
Are there non-printable areas on the QIDI Q3D build plate?
By default, the lower-left 5 x 17 mm area and the lower-right 11 x 17 mm area are non-printable because of the toolhead filament cutter. Remove the cutter if you need full-plate printing. The plate is a double-sided PEI magnetic flexible build plate for easy part removal.
How long does the QIDI Q3D take to heat up and how much power does it use?
The ceramic hotend heats from 30 C to 220 C in about 40 seconds. To bring the heatbed up quickly, the printer runs at maximum power for about 3-5 minutes. Steady-state power at 25 C ambient is about 190 W for PLA and 500 W for ABS. The 220 V model is rated 1200 W + 280 W for chamber heating; the 110 V model is 300 W + 280 W for chamber heating.
Does the QIDI Q3D support an extruder cooler?
An extruder cooler is optional on the Q3D and requires the Polar Cooler accessory. It is recommended when printing large size model, high-temperature or fiber-reinforced materials for long sessions.
Is the QIDI Q3D good for beginners and for home or office use?
Yes. Automatic leveling with the Eddy sensor, Input Shaping, power-loss recovery, filament run-out detection, AI camera monitoring and a 4-inch touchscreen make daily printing straightforward. The 70 C heated chamber, 3-in-1 air filter and sealed-printing compatibility also make it practical for home or office use with engineering filaments.
What voltage does the QIDI Q3D use?
The Q3D is supplied in region-specific models: 110 V or 220-240 V AC, 50/60 Hz. Always check the label next to the power socket on the printer before use to confirm the supplied voltage matches. The printer will maintain maximum power for about 3-5 minutes to heat the bed quickly.
Q2
QIDI Box
Plus 4
Q1 Pro
X-Max 3